Issue ID | 1018929 |
Internal NHTSA # | 10549435 |
Manufacurer | Chrysler Group LLC |
Brand | DODGE |
Model | DART |
Model Year | 2013 |
File date | 23/10/13 |
Component | POWER TRAIN |
Product type code | VEHICLE |
Description of the problem | Pressed in clutch pedal to start vehicle. After car started, tried to take car out of gear but it wouldn't budge. Also, the clutch peddle would not release, as it was stuck to the fully pressed position. Car began to roll as if it started to disengage but the peddle was still completely pressed in. I immediately turned the car off. I had to pull the clutch peddle up by hand to get it to disengage. Called dealer service, said they couldn't resolve the issue if they couldn't duplicate the problem. I've noticed many people with the same issue. Chrysler needs to issue a recall on this. |
Vehicle Mileage at Failure | 23400 |
Number of Occurences | 1 |
Source of the issue | NHTSA WEB SITE |
City and State | BLANCHARD, OK |
VIN pattern | 1C3CDFBH0DDXXXXXX |
Was vehicle invloved in a crash? | N |
Was vehicle involved in a fire? | N |
Was incedent reported to police? | N |
Was medical attention required? | |
Was part original equipment? | |
No. of injured persons | 0 |
No. of fatalities | 0 |
Date of purchase | 29/06/24 |
Was original owner? | N |
Anti-lock brakes | N |
Cruise control | N |
Number of cylinders | 4 |
Drive train type | |
Transmission type | |
Vehicle speed | 0 |
DoT tire identifier | |
Tire size | |
Location of tire code | |
Type of tire failure code | |
Was defective tire repaired? | |
Date of manufacture | |
Type of child seat code | |
Type of restraint | |
Dealer's name | |
Dealer's telephone number | |
Dealer's city | |
Dealer's state code | |
Dealer's ZIP code |