Issue ID | 159232 |
Internal NHTSA # | 707265 |
Manufacurer | Ford Motor Company |
Brand | FORD |
Model | WINDSTAR |
Model Year | 1995 |
File date | 29/06/24 |
Component | SUSPENSION:FRONT:CONTROL ARM:LOWER ARM |
Product type code | VEHICLE |
Description of the problem | Right front sub frame to control arm bushing inner sleeve rotates in subframe mounting bracket. The separation on the front of the bushing inner sleeve wears on the mounting bracket, eventually enlarging the mounting hole and wearing the metal thickess away. The result is a clucking noise in the front end because of the now loose lower control arm. Nhtsa item #'s sb036893 and sb045761 reference the complaint but not the real problem. If the front bracket fails totally at some point, the van will lose its rf suspension and steering. Also causes the van to pull to the right, and makes it impossible to align the front end because off approximately noticable toe variation on there right wheel. Ford dealer mechanic says it is a common problem. Just tighten the bolt and hope for the best or replace the entire subframe. *ak |
Vehicle Mileage at Failure | |
Number of Occurences | 1 |
Source of the issue | NHTSA WEB SITE |
City and State | SAN ANTONIO, TX |
VIN pattern | 2FMDA5144SBXXXXXX |
Was vehicle invloved in a crash? | |
Was vehicle involved in a fire? | N |
Was incedent reported to police? | N |
Was medical attention required? | |
Was part original equipment? | |
No. of injured persons | |
No. of fatalities | |
Date of purchase | 01/10/96 |
Was original owner? | N |
Anti-lock brakes | Y |
Cruise control | Y |
Number of cylinders | |
Drive train type | FWD |
Transmission type | |
Vehicle speed | |
DoT tire identifier | |
Tire size | |
Location of tire code | |
Type of tire failure code | |
Was defective tire repaired? | |
Date of manufacture | |
Type of child seat code | |
Type of restraint | |
Dealer's name | |
Dealer's telephone number | |
Dealer's city | |
Dealer's state code | |
Dealer's ZIP code |